Why Your Swim Spa Cover Stinks!

Hey, no offense, however your Swim Spa Cover smells bad. Possibly you’ve gotten used to it?
Don’t worry, it takes place to all spa owners at one time or another; water is among nature’s most erosive substances. Moisture seeps in and becomes trapped between the external vinyl shell and the plastic wrapped foam cores. The warm, wet environment is best for mold and mildew and other forms of foul-smelling stuff.
If moisture has actually penetrated further into the plastic wrapped foam core, the cover becomes waterlogged, which can quickly grow all sorts of dark and stinky slime, however also make the cover really challenging to remove, and not as effective at keeping the heat in the spa. Time for a much better type of Swim Spa Cover

Smelly Swim Spa Cover?!?
• Broken or harmed. Cracked foam cores, ripped or used areas, torn joints. A Swim Spa Cover that loses it’s arched roofing system line, to keep water draining pipes off properly, will eventually begin to puddle water, which is most likely time to purchase a brand-new Swim Spa Cover! A Swim Spa Cover with threadbare spots in the vinyl is likewise bad news, and although you can fend off the inescapable with a duct tape repair, the water will win, ultimately.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A better Swim Spa Cover can withstand longer durations, but it’s a great practice to get rid of the cover and let it get some air on a weekly basis. If you can easily open the zipper to permit moisture to escape do so, however don’t remove delicate foam panels unless definitely needed.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s simple to make a Swim Spa Cover with tape and staples, however it will not stop moisture very well. Even the best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat bonded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only genuine option is a Swim Spa Cover uses air to insulate rather than foam.
• Bad Spa Water. If the spa water is not maintained regularly with sanitizer and filtering, or is not surprised often enough, germs and algae can take advantage of a congenial environment to grow. Low pH, high chlorine or high ozone levels can likewise weaken the underside of your Swim Spa Cover cover. Since the cover is so near the spa, it soaks up the chemistry of the spa. Clean, clear and hygienic water is the best environment to prevent smelly spa covers. (Sorry however this is simply BS) The truth is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor Lightweight Swim Spa Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roof, that can be even worse than no roof at all, if an overhanging eave drains water onto the Swim Spa Cover Clean and condition a spa cover 2-4 times per year, so that it constantly looks great, and is safeguarded from the components. Once again, this truly isn’t really going to stop the mold and mildew from growing inside a foam cover But it will assist your spa dealership pay their expenses. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.

Your Choices

Fix Your Swim Spa Cover!
• Remove to Safe Location: This first step might seem apparent, but you require a great location to allow the cover to sit undisturbed from family pets, wild animals, and winds. It needs to be a sunny location if possible, or a dry indoor place with low humidity can also be used.
• Deodorize & Disinfect: You might not have to do both, it’s finest to be as gentle as possible. Don’t use household cleaning products on your Swim Spa Cover, strange chemicals can wind up in your spa water. Carefully clean all outside surface areas with spa cover cleaner, and allow the panels to dry.
• Remove the Panels: Again, this ought to be prevented if possible, due to the fact that the panels could become harmed throughout elimination or cleaning. But if you determine that there is something slimy within, you can usually unzip and get rid of the panel for a cleaning inside and out.

How typically does your spa dealer expect you to do all this? If your swim spa is secured from a lot of sun and rain, twice per year. If it’s visible it must be 3-4 times per year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster. 

Better Choice
The most convenient remedy for a foul-smelling Swim Spa Cover is to just purchase a various kind of Swim Spa Cover A stinky swim spa cover just indicates that your cover is taking on wetness, and things are starting to grow! Lightweight Swim Spa Covers from SpaCap.com that doesn’t use foam but has actually sealed air chambers instead will avoid providing the mold and mildew a location to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *